Compact multiprocess machine, ready to use in three steps
Like all Multiprocess welding systems from Fronius, the TransSteel 2700 is ready for use in just three steps: select the wire, wire diameter and gas and start welding.
You can switch between the individual welding processes in 60 seconds. In addition, the TransSteel can be used as a single-phase device up to 220A (TIG).
All of our machines are delivered to you validated, safetytested and serviced, with wire/feeder rolls, liner and a start kit (contact tips and gas nozzles) Contact us to hear about our wide range of welding torches/hoses, wheeled carts and ground cables, or write your wishes/needs in the Comments-field under "Get an offer".
Combining MIG/MAG, TIG, and electrode welding in one device means you no longer have to purchase any other power sources. There is absolutely no difference in the welding performance of the respective process compared with a dedicated device.
Steel, CrNi, AlMg, AlSi, Metal Cored, Rutil FCW, Basic FCW, self-shielded wires, 0.8 – 1.2 mm wire diameter, Eight different gas mixtures.
The intuitive operating concept enables welders to start work straight away – no prior knowledge of the device is required. All the essential welding parameters can be viewed and adjusted on the front panel. The only parameters that have to be selected before welding begins are the gas, wire diameter and material thickness.
Difficult-to-control and spattering intermediate arcs are a thing of the past thanks to the pulse function and minimizing spatter reduces the need for reworking by up to 70%. Compared to the standard arc, the pulsed arc enables up to 30% faster welding speeds, primarily for aluminum and CrNi applications.